Plastic Slip Sheets

Specification

PLASTIC SLIPSHEET SPECIFICATION

1) Description
Plastic slipsheets are used to replace pallets in movement of cargo in shipment. It is extruded and the main bulk of the material is recycled polyethylene (PE). A rough criss-cross pattern is embossed on the top surface to create a higher coefficient of friction so that the unitized load will remain stationary when the sheet is moved (slip) on the bottom. The lower surface is smooth so it can slide smoothly on the floor during loading and unloading of the unitized load.

2) Size
2.1 Common sizes:
Width (mm)	Length (mm)
990	1040
1100	1200

2.2 Other sizes can be made to order
3)Load Capacity

Load Capacity(tonne)	Thickness (mm)
1.0	0.7
1.2	0.9
1.5	1.1
1.9	1.5
2.0	1.6
3.0	2.2
3.4	2.5
4.1	3.0
Other capacities can be made-to-order

4) Material
Made mainly from recycled polyethylene and reusable ,100% recyclable and re-saleable on disposal.
Density	0.95 plus minus 5%
Colour	Black

5) Tensile strength And Elongation at Break
Tensile strength	16MPa Min.
Elongation at break	250% Min.

6) Coefficient Of Friction(COF)
Top surface(rough)	: 0.5+
Bottom Surface(smooth)	: 0.2 – 0.3

7) Reference
http://en.wikipedia.org/slip_sheet